|
Part / Service |
Price List |
Brake Pads
- Cryogenic Treatment
Cryogenic treatment of the pads, reduces pad wear.
|
$5.00/pad |
Brake Rotor
- Cryogenic Treatment
Reduces wear, distortion, cracking. |
$25.00/each |
Brake Rotor Hat
- Cryogenic Treatment
Reduces distortion and cracking. |
$10.00/each |
Camshaft
- Cryogenic Treatment
Cryogenic treatment of camshafts, increases the wear
Resistance of the cam lobes and reduces the tendency
of the camshaft to break. |
$50.00/each |
Connecting Rod
- Aluminum Cryogenic
Treatment
Cryogenically treated rods, last longer and have less
tendency to break. |
$7.00/each |
Connecting Rod
- Ferrous Cryogenic Treatment
Cryogenically treated rods, last longer and have less
tendency to break. |
$8.00/each |
Crankshaft
- Cryogenic Treatment
Cryogenically treated crankshafts, reduces wear on
Journals and crank pins. It reduces crank breakage.
Stabilizes the crankshaft to prevent distortion due to
Heat and vibration. |
$100.00/each |
Cylinder Head
- Aluminum Cryogenic
Treatment
Cryogenic treatment of the cylinder head, strengthens
the head and reduces wear on valve seats. It helps
prevent warping of the head due to heat and vibration.
Heads become more resistant to detonation. |
$90.00/head |
Cylinder Head
- Ferrous Cryogenic Treatment
Cryogenic treatment of the cylinder head, strengthens
the head and reduces wear on valve seats. It helps
prevent warping of the head due to heat and vibration.
|
$100.00/head |
Engine Block, 4 cylinder
- Cryogenic Treatment
Cryogenic treatment of cylinder blocks, reduce cylinder
wear. It reduces distortion caused by vibration and heat
and stabilizes the block. Treatment reduces harness
differences in the block. This makes a better machined
surface for the rings to sit on and creates better ring
sealing, which creates more horsepower. Treatment
should ideally be done before final machining. |
$200.00/each |
Engine Block, V8,
V6
- Ferrous Cryogenic Treatment
Cryogenic treatment of cylinder blocks, reduce
cylinder wear. It reduces distortion caused by
vibration and heat and stabilizes the block.
Treatment reduces hardness difference in the
block. This makes a better machined surface
for the rings to sit on and creates better ring
sealing, which creates more horsepower.
Treatment should ideally be done before final
machining. |
$300.00/each |
Gear, Ring and Pinion
- Cryogenic Treatment
Cryogenic processing reduces wear and tooth
breakage. Greatly increases the life of the gear. |
$100.00 |
Gears,
Differential Quick Change Gears, set of 2
- Cryogenic Treatment
Cryogenic treatment of gears. Reduces wear.
Increases reliability. |
$20.00 |
Head Bolts
- Cryogenic Treatment
Cryogenically treating the head bolts helps reduce
bolt torque relaxation, which helps maintain the proper
torque on the bolts, an important factor in eliminating
head gasket problems. |
$1.00/each |
Lifter, Roller
- Cryogenic Treatment
Cryogenic processing increases wear resistance and
reduces the chance of breakage. |
$4.00/each |
Main Bearing Caps & Cap Bolts
- Cryogenic Treatment
Cryogenically treating the main bearing caps prevents
distortion, which keeps the bearings in proper
alignment,
and there is less chance of the cap breaking. Treating
the bolts helps the bolts maintain the proper torque and
reduces their tendency to relax. |
$50.00/set |
Piston
- Aluminum Cryogenic
Treatment
Cryogenic processing strengthens the piston to resist
detonation and increases wear resistance. |
$8.00/each |
Push Rods
- Cryogenic Treatment
Cryogenically treating push rods reduces the flex of
the rod and helps keep valve timing accurate. |
$2.00/each |
Rocker Arm
- Aluminum Cryogenic
Treatment
Cryogenically treating rocker arms reduces breakage
and flex of the rocker arm, reduces wear on wear areas.
|
$2.00/each |
Rocker Arm
- Ferrous Cryogenic Treatment
Cryogenically treating rocker arms reduces breakage
and flex of the rocker arm, reduces wear on wear areas.
|
$2.50/each |
Rocker Arm, Shafts
- Cryogenic Treatment
Cryogenically treating rocker arm shafts reduce breakage
and flex. Reduces wear on wear areas, and wear on
bearing surfaces. |
$5.00/each |
Shaft, Quick Change Lower Drive Shaft
- Cryogenic Treatment
Cryogenic treatment increases durability and
reduces wear, reduces spline breakage. |
$15.00/each |
Timing Chain
- Ferrous Cryogenic Treatment
Cryogenically treating a timing chain results
in greatly increases life and reduced "stretch."
|
$12.50/each |
Timing Gears
- Ferrous Cryogenic Treatment
Cryogenically treating a set of timing gears
results in greatly increased life. |
$12.50/set of two |
Valve Keepers
- Cryogenic Treatment
Cryogenic treatment of valve keepers reduces
breakage and wear. |
$1.00/valve |
Valve Spring
- Cryogenic Treatment
Cryogenic processing greatly increases the life
of the spring. Reduces the loss of the spring
pressure. Some drag racing customers report
over seven times the spring life and one-third the
loss of spring constant. |
$2.00/each |
Valve Spring
Retainer
- Ferrous Cryogenic Treatment
Cryogenically treating valve spring retainers
reduces wear and breaking. |
$1.00/each |
Valves
- Cryogenic Treatment
Cryogenically treating valves increases the
resistance of the valve to wear, and strengthens
the valve. Reduces warping. |
$2.50/each |
Wrist Pin
- Ferrous Cryogenic Treatment
Cryogenic processing strengthens the wrist pin
and reduces wear on it. |
$2.50/each |
|
All parts must be clean, completely
disassembled, and lightly lubricated.
Cryogenic treatment of parts not listed is $6.50 per
pound. We will be happy to quote prices
for parts not listed. For unusual or exotic alloys or
parts made of plastics,
ceramics, etc., please consult us directly. We will be
happy to work with you
on unusual wear or breakage problems. If you have any
questions, please call or email us.
We will be delighted to talk with you.
Cryogenic
Processing Pricing
/ REM® ISF® Preparation Pricing
REM and ISF are
registered trademarks of REM Chemicals, Inc. All Rights Reserved.
|
